To facilitate the transfer in or out of the standing frame or to optimize the comfort of t...
Some supports are anchored using a Velcro strap to facilitate positioning of the user.
To install the tray, insert the rods into the round glides located on the hip supports.
To adjust the headrest height (upward), loosen the knob behind the shoulder rest, slide th...
To adjust the height of the shoulder support, use the Allen key and loosen the two set scr...
To adjust the height of the thoracic supports, loosen the two knobslocated in the upper pa...
To adjust the height of the hip supports, loosen the wing knob and the two other knobs loc...
To adjust the height of the pommel you will need to use the Allen key located on the side ...
To adjust the abduction angle, loosen the two knobs on each side and gradually lift outwar...
To adjust the depth of the knee supports, loosen the knob on the cross bar of the knee sup...
To adjust the height of the footrests, loosen the two knobs located behind the main suppor...
To facilitate transporting the device, it is made in two parts.To separate the standing fr...
Each of the four wheels has a brake. Make sure all wheels are locked when the standing fra...